PT. Daya Esa Mulya Mandiri
Jl. Ciputat Raya No. 3B
Kebayoran Lama Utara
Jakarta 12240
Telp : (62) 21-7290467
Fax : (62) 21-7292930
E-mail : sales@dayaesa.com
Jl. Ciputat Raya No. 3B
Kebayoran Lama Utara
Jakarta 12240
Telp : (62) 21-7290467
Fax : (62) 21-7292930
E-mail : sales@dayaesa.com
Centrifugal Pump Data Sheet
DATA SHEET
CENTRIFUGAL PUMP
| SPEC No. | ISSUE | ||
| DATE | PAGE | ||
| CLIENT | LOCATION | ||
| SERVICE | PLANT | ||
| SUPPLIER MFR | EQUIPMENT No. |
| No. Operating | No. Spare | Total Required | Duty |
Intermittent Continuous |
|||
| Type | Horizontal Inline Vertical | Multistage No. | Stages | ||||
| Fluid/Service | |||||||
| Characteristics | Corrosive Toxic Flammable Abrasive Solid Other, Specify | ||||||
| No. of Motors Req'd | Motor No. | Provided By | Mounted By | ||||
| No. of Turbines Req'd | Provided By | Mounted By | |||||
| Multiple Units | Total Flow | Total Head | |||||
CONDITION OF SERVICE, EACH PUMP
| Normal Flow | Rated Flow | Disch. Press | |||
| Temperature | Max. | ||||
| Suction Press | Max. Flooded | Rated | |||
| Specific Gravity | Differential Pressure | ||||
| Vapor Pressure | Differential Head | ||||
| Viscosity | NPSH Available | ||||
| Corr./Erosion Caused By | Corrosion Allowance | ||||
| Cold Start Temp. | & Viscosity | ||||
PERFORMANCE
| Curve No. Req'd | |||
| RPM | NPSHR (Water) | ||
| Eff | Rated Power | ||
| Max. BHP Rated Impeller | Max. Head Rated Impeller | ||
| Min. Continuous Flow | Rotation (Viewed from Cplg. End) | ||
| Cold Start BHP | |||
CONSTRUCTION
| Nozzles | Size | Rating | Facings | Location |
|---|---|---|---|---|
| Suction | ||||
| Discharge |
| Case | Mount | Centre Line Foot Bracket Other, Specify | |||
| Split | Axial Radial | Suction Type | Single Double | ||
| Pressure | Max. Allowable | Hydro Test Pressure | |||
| Connect | Vent Drain Cage | ||||
| Impeller | Dia | Rated | Max. | Min. | Type | ||||
| Mount | Between Bearing Overhung | ||||||||
| Bearing Mount | ||||||||
| Lubrication | Ring Oil Flood Oil Mist Flinger Pressure Grease | |||||||
| Coupling | Mfr. | Model | Guard / Yes | |||||
| Driver half Mtd. By | Pump Manufacturer Driver Manufacturer Purchaser | |||||||
| Packing | Mfr. and Type | Size/No. Of Rings | ||||||
INSPECTION AND TESTING
| Non Witness Perf. | Witness Perf. | Non Witness Hydro | Witness Hydro | |
| NPSH Required | Witness NPSH | |||
| Shop Inspection | Dismantle & Inspect After Test | Specification | ||
MATERIALS
| Pump casing | Wear Rings | Impeller | |||
| Shaft | Shaft Sleeves | Stuffing Box Blushing | |||
| Glands | Gaskets | Base Plate |
AUXILIARIES
| C.W. Pipe Plan API-610 | |||||
| Cu SS CS Tubing Pipe | |||||
| Total Cooling Water Required | |||||
| Flow | |||||
| Pressure | Max. at | ºC | |||
| Sight Flow Indicator Required | Packing Cooling Injection Required | ||||
| Pressure | ºC | Max. at | ºC | ||
| Pump Thrust | Up Down | ||||
| Length Below Mounting Flange | |||||
MECHANICAL SEAL : Cartridge Type
| Manufacturer | Supplied By | ||||
| Model Number | |||||
| Type | Single Double Inside Outside Balance Unbalanced | ||||
| Rotary Unit | |||||
| Seal Ring | Shaft Packing | Throttle Bushing | |||
| Seal Flush Plan Plan 11 | CU SS CS Tubing Pipe | By | |||
| External Seal Flush | Flow | Press | |||
| Auxiliary Seal Plan API-610 | CU SS CS Tubing Pipe | By | |||
| Auxiliay Seal Quench Fluid | |||||
MOTOR DRIVER
| Hp | RPM | Frame | Volts/Phase/Hz | ||||
| Mfr | Type | NEMA Design | |||||
| Enclosure | Rated | Insul Class | |||||
| Elevation | Full Load Amps | Space Heaters | |||||
| S.F. | Constant Speed Variable Speed | ||||||
WEIGHTS
| Pump & Base | Motor | Gear | Turbine |
NOTES
| Contract No. | Datasheet No. | Requisition No. | Unit/Area | ||||
| Rev. Date | Comments | ||||||